DOVE™ Slurry/Gravel Pumps are designed to dekiver the highest value in terms of Quality & Efficiency, as well as lowest Total Owership Cost to our clients. DOVE™ Slurry/Gravel Pumps are produced in two configurations of In-Line (Horizontal) Slurry/Gravel Pumps and Submersible(Vertical) Slurry/Gravel Pumps.

Most often, these types pf pump are the most appropriate for all types of hydraulic sluicing mining operations. The intended purpose of using Gravel Pump is to eliminate the necessity of trucking ore to the treatment plant. By applying slurry/Gravel pumps in the mining operation istead of trucks, overall ore transportation costs are reduced by a cosiderable amount. Rates of production throughput are increased by a continuous flow of ore to the treatment plant at all times. No downtime loss due to trucks breaking down or insufficient trucks being unable to keep up with the mining ore removal.

Submersible (Vertical) Slurry / Gravel Pumps

Five models to choose, from 100 m³ /hour to 554 m³ /hour. Configured as a highle efficient, shaft driven, direct drive vertical (Submersible) slurry/Gravel pump, which can be used as a semi-submersible pump to a depth of 1.2 - 1.6 meters (depending on the model). Primarily used in hydraulic sluicing, as the most efficient means of slurry ore transport from the hydraulic sluicing mining area to the wash plant site. Used whenever trucking the ore is inapplicable or not feasible.

The other usage is for removing and transporting slurried ore from a temporary tailings dam at the treatment plant site, away to a permanent disposal dam site.

Highly efficient tool for breaking and disintegration of heavy clay, configured either after Trommel or Grizzly Separator and prior to the concentration of minerals contain in heavy & sticky clay ore.

Thesse models are mounted on robust enclosed skid frames for protection and fot suspending below a triframe if required. The pump can then be suspended above the pump medium i.e. waste treated ore, for convenient positioning.

In-Line (Horizontal) Slurry / Gravel Pumps

A strurdily constrycted, highly efficient, all purpose slurry transport pumps, used for transportation of all types of ore & slurry, where wheeled transport is not feasible or inapplicable. Six models to choose , with processing capacity range of 70 m³ - 500 m³ / hour.

Pump can also be used in the wash plant cycle for many other applications such as:

• Pumping under sized ore, Ex-Trommel, into the jigs, if the plant set-up disallows normal gravity flow arrangement.
• From Primary Jigs to Secondary Jigs that is stacked on a tier basis.
• Pumping treated, waste slurry ore from a temporary retention dam at the treatment plant to the permanent retention/tailings dam. Particularly useful if space and especially height is a limiting factor at the plant site.

The In-line (Horizontal) Gravel Pumps are monted on robust enclosed skid frames, as well as pump canopy, for protection of the pump components. An optional 4-wheels trailer, or wheel base and stand supports is available with all models.