LOGO

mining equipment

DOVE™ Jig concentrators, Jig Separators have an outstanding history of long and consistent performance of proven high yield of Diamonds, Color Gemstone, Gold, Base Metals, Heavy Metals & other Heavy Minerals recovery, with minimal loss, maintaining maximum profitability in the ore concentrating process.

The usage of Jigs separators, Jig concentrators to concentrate and recover minerals of all kinds is widely practiced within the industry, based on the fact that the high specific gravity differential makes very good recoveries possible, with very little operating attention. DOVE™ Jig concentrators, Jig separators have the ability to absorb large fluctuations in ore Grade, Tonnage rate, and Dilution, without any effect on the final recovery of minerals concentrate.

DOVE™ Jig separators, Jig Concentrators do not require clean water, works with recycled water.

DOVE™ Jig separators are easy to install, operate and maintain, with highest rate of minerals recovery, designed for continuous concentration and recovery, without operator interference.

DOVE™ Jig concentrators are fabricated with highest quality material, built to last, and supplied with ONE-YEAR manufacturer warranty. They are extremely reliable and require minimum amount of maintenance.

DOVE™ Jig Concentrators are manufactured in seven models with capacities ranging from 8 m3 / hour slurry (3 tons / hour solids), up to 300 m3 / hour (100 tons / hour solids), per Jig separator.

gravel pump

DOVE™ Jig Concentrators, Jig separators are designed for the following applications:

  • To recover Finished Concentrate from ores in which the mineral grains are liberated. Recovery of minerals of various kinds that occur in Placer / Alluvial deposits, or decomposed rocks. 
  • Recovery of minerals from primary/ hard rock ore, which can be liberated by crushing/ grinding process, i.e. (Diamonds, Color Gemstones, Barite, Gold & other precious metals, base metals, ferrous metals, light metals, coal) and heavy minerals of all kind. 
  • Cobbling operation, to discard waste rock before final processing of the crude concentrate.
Space holder.
TECHNICAL SPECIFICATION
JIG MODELS PROCESSING CAPACITY ENGINE / MOTOR

SLURRY
(m 3 /hr)

SOLIDS (tons/hr)

DIESEL
ELECTRIC & MANUAL START
QTY (HP/KW)

GASOLINE
ELECTRIC & MANUAL START
QTY (HP/KW)

ELECTRIC MOTOR
QTY (HP/KW)

JS 100 8-12 3-4 1 (7.0/5.1) 1 (4.8/3.5) 1 (4.0/3.0)
JS 150 15-24 5-8 1 (7.0/5.1) 1 (4.8/3.5) 1 (4.0/3.0)
JS 200 24-30 8-10 1 (7.0/5.1) 1 (7.2/5.3) 1 (4.0/3.0)
JS 300 60-90 20-30 1 (8.0/5.9) 1 (8.2/6.0) 1 (7.5/5.5)
JS 320 90-120 30-40 1 (8.0/5.9) 1 (8.2/6.0) 1 (7.5/5.5)
JS 350 120-150 40-50 1 (10.5/7.72) 1 (10.0/7.4) 1 (10.0/7.5)
JS 400 180-240 60-80 2 (8.0/5.9) 2 (8.2/6.0) 2 (7.5/5.5)
JS 460 240-300 80-100 2 (10.5/7.72) 2 (10.0/7.4) 2 (10.0/7.5)
  • Processing capacities may fluctuate in accordance to the type of ore, particle size, the jig mesh size, the speed of feeding, the ratio of water to solids, and JIG Balancing.
  • Ratio of solids to liquid (1:3).
  • Jig screen is available in various mesh size and could be modified, in accordance to your requirements, w/in few minutes in the field.
  • Specifications could be modified, without notice.
© 2001-2008 dove equipment & machinery co., ltd. All rights reserved. Designed & Developed by ADVANCE STEP